From RISDpedia
General Overview
|
|
great for gluing most materials together. Quite permanent, make sure you have good placement as it will not easily unglue for repositioning
|
Tips, Tricks & How-Tos
|
- After spraying both sides of the materials intended to be adhered, you must wait 30sec to one min until the spray is barely tacky before pressing the two sides together.
|
Not Recommended
|
|
Although this is great for foam, the propellent can melt softer foams such as Pink Foam.
|
Safety Information
|
Note: All safety information contained here within is pure recommendation, and its sole purpose is to help students work safer. This should in no way be considered a professional statement or a replacement for reading product information. Please read all instructions included with products before use.
wear a respirator or use a spray booth
|
Availability
|
|
|
External Links
|
|
NOTE: All information contained within this article is pure opinion. Although this article is intended to help students, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.
RISDpedia and its contributers take NO responsibility for the information contained within.
RISDpedia is not an official site of the Rhode Island School of Design.
|
|
|
