From RISDpedia
General Overview
|
|
Part A and B mix ratio that cures at room temperature for a flexible and strong mold rubber. Cures up to 48 hours (minimum ~12-24) and for full strength up to 7 days.
|
Tips, Tricks & How-Tos
|
|
Molding a sculpture with lots of undercuts or otherwise complex forms where plaster molds would be unsuitable.
|
Not Recommended
|
|
When time is of the essence. Has a tendency of running.
|
Safety Information
|
Note: All safety information contained here within is pure recommendation, and its sole purpose is to help students work safer. This should in no way be considered a professional statement or a replacement for reading product information. Please read all instructions included with products before use.
Wear latex gloves and work in a well-ventilated area. Can cause skin irritation.
|
Availability
|
|
Direct from manufacturer.
|
External Links
|
http://www.polytek.com/products/74.pdf
|
NOTE: All information contained within this article is pure opinion. Although this article is intended to help students, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.
RISDpedia and its contributers take NO responsibility for the information contained within.
RISDpedia is not an official site of the Rhode Island School of Design.
|
|
Poly 74 Series RTV Liquid Rubbers
|
| Image of back: | NA
|
| Manufacturer: | Polytek
|
| MSDS: | NA
|
| Category: | NA
|
|
