General Overview
|
|
Part A Resin and Part B Hardener. The 105 resin is constant, but different hardeners are offered.
- 205 Fast Hardener
- 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with the 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.
- 206 Slow Hardener
- 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.
- 207 Special Coating Hardener
- This hardener was especially developed for use with WEST SYSTEM Brand 105 Resin in coating applications where an exceptionally clear, moisture-resistant, natural wood finish is desired. Cures to a light amber color, similar to traditional spar varnishes. An ultraviolet inhibiting additive improves the resistance of a WEST SYSTEM 105/207 mixture to sunlight, but the cured epoxy surface will still require the additional protection of a quality UV-filtering varnish. 207 is designed to self level for smooth finishes, and to wet-out and bond fabrics. Although it provides good physical properties for general bonding applications, it is more difficult to thicken and less cost effective for this purpose than 205 or 206 Hardeners. It's also used for laminating veneers where bleed through at joints may be exposed to sunlight.
- 209 Extra Slow Hardener
- 209 Extra Slow Hardener is formulated for use with WEST SYSTEM Brand 105 Resin for general coating and bonding applications in extremely warm and/or humid conditions or when extended working time is desired at room temperature. Provides approximately twice the working time of 206 Slow Hardener. Forms a clear, amber-colored solid with good physical properties and moisture resistance for bonding and coating applications. Not intended for clear coating.
|
Tips, Tricks & How-Tos
|
- Mix Ratios
- The mix ratios above refer to the ratio of resin to hardener if you are metering by weight or volume. When using 300 Mini Pumps, pump one stroke of resin for every one stroke of hardener. Refer to the instructions included with the 300 Mini Pumps before using.
- Low Temperature Considerations
|
Not Recommended
|
|
Applications in which a gap filling adhesive is unnecissary (fine Jointery, simple wood lamination, etc.) Not suitable for situations in which a quick bond is necessary
|
Safety Information
|
Note: All safety information contained here within is pure recommendation, and its sole purpose is to help students work safer. This should in no way be considered a professional statement or a replacement for reading product information. Please read all instructions included with products before use.
Gloves and Respirator with Organic Vapor Cartridges (availible at Metcalf Store)
|
Availability
|
|
West Marine (Seekonk MA, Warren RI, East Greenwich RI)
|
External Links
|
|
NOTE: All information contained within this article is pure opinion. Although this article is intended to help students, it may contain faulty or misleading information. This article is not to be considered professional opinion or advice, and is in no way a replacement for reading all safety/instructional documentation. Always remember to protect yourself when handling/using hazardous materials, as well as test new techniques before using them on projects/work intended to be handed in or used.
RISDpedia and its contributers take NO responsibility for the information contained within.
RISDpedia is not an official site of the Rhode Island School of Design.
|
|
|
